Poor Quality Manuscripts – Wasting Reviewer Time and Journal Resources

Journals are wasting our time by having us review poor quality manuscripts.

Poor quality manuscripts are a waste of time for peer-reviewers like me, because there is no hope they will get published. Before the pandemic in 2020, I used to review manuscripts often. However, when I noticed I was getting a lot of poor quality manuscripts to review in the wake of the pandemic, I just stopped. I needed a break.

According to this peer-reviewed article:

Scientists are increasingly overwhelmed by the volume of articles being published. The total number of articles indexed in Scopus and Web of Science has grown exponentially in recent years; in 2022 the article total was ∼47% higher than in 2016, which has outpaced the limited growth—if any—in the number of practicing scientists.

These authors call it “the strain on scientific publishing”. A post on the International Science Counsel blog calls it “overpublication”, and discusses the kerfuffle with Wiley (a legitimate scientific publisher) acquiring Hindawi (considered by many a predatory publisher) in the context of this overpublication problem. I have my own criticisms of the Wiley/Hindawi connection – especially when what I consider “garbage journals” from Hindawi and MDPI are indexed.

But these articles are talking about published manuscripts. I’m talking about receiving poor quality manuscripts for review. Theoretically, the editor of the journal should not be sending poor quality manuscripts out for review.

After taking a few years off from reviewing papers, I restarted in 2026, and the results are not looking good. I made a graphic to show you.

 

Reviewing manuscripts takes time, because you want to give the authors feedback on what they can improve.

As per the graphic, so far, I have accepted 12 manuscripts for review – 11 from the publisher Springer Nature. Of those, 7 were not worthy of review and should not have even been forwarded to me by the reviewer. By “not worthy of review”, I mean all you had to do was look at it and realize it was not a scientific paper. Before 2026, I would not have received such poorly written manuscripts for review. What’s going on?

What Happens When You Review Poor Quality Manuscripts?

Earlier this year, my colleagues and I published a paper about the difference between using AI and statistical models in scientific research. This may have helped me get on journal lists as a potential reviewer of papers on the topic of AI, because this year, of the 12 I’ve reviewed, as per the graphic above, 5 have had something to do with AI. Most – but not all – of the others relate to topics I’ve published on previously, such as medical education.

So the topics of the manuscripts I received were legitimate. But why were the manuscripts so crappy? The graphic below summarizes the current status of all 12 manuscripts as of this writing.

A small proportion of manuscripts that are reviewed actually get published.

As you can see, of the 5 that were either “worthy of review” or “poorly done but worthy of review”, 2 have been accepted for publication, 2 are still under review, and 1 was rejected. Remember, a rejected manuscript represents a waste of time to both the reviewers (who are unpaid) and the journal (which has limited resources).

Now let’s look at the 7 that were “not worthy of review” in the first place, and here is the current status of those: 4 were formally rejected; 2 that I reviewed earlier in the year (May and June) never were revised and resubmitted by the authors (probably because the reviews were so bad), and 1 is still under review. I expect that last one will get rejected also.

What Kind of Tripe Am I Receiving to Review?

…and when I say “tripe”, I mean it. You don’t even have to read the manuscript to be able to tell there is something fundamentally wrong with it. Here are examples of what I mean:

  • The manuscript is filled with non-printing characters.
  • The manuscript is missing tables, or has only one or two tables that are overloaded with information, do not make sense, or both.
  • The manuscript contains bullet-points
  • The manuscript contains many headings and subheadings with only a sentence or a very small paragraph after them.
  • The manuscript contains words that seem to have been randomly printed in boldface throughout the text.

…and this is before even reading it. This is just from eyeballing it. Remember, when you agree to review and article, you are only shown the abstract. If I could see the whole manuscript first, I would definitely not waste my time reviewing manuscripts like this.

Okay, so you might think: What if you read it? Maybe the authors don’t know the difference between an essay in college and a peer-reviewed article. Maybe it’s actually well-written.

Unfortunately, if you read it, it just gets worse. It usually doesn’t say anything. For example:

  • Papers are cited, but not described (especially reports of studies – what are the findings???).
  • Papers lack citations where they belong (e.g., after claims, and when summarizing results in reviews).
  • Descriptions of concepts (in both the introduction and the discussion) are very general and do not really explain the concepts, or connect them directly to the topic at hand.

Okay, so I’m not naïve. I realize these papers were likely mostly if not completely written using some large language model (LLM) like ChatGPT or Gemini. But my question is…

Why Are Editors Passing on Poorly Written Manuscripts for Review?

If I can just look at the manuscript and – without even reading it – tell it is tripe, why is the editor of the journal even sending it out for review? I posed this question to one of my co-authors on the paper I mentioned earlier, who has expertise in AI tools.

He explained that a lot of scientific journals are automating their process of filtering in articles for review using AI tools!

…which is disgusting. This is a complete failure of the system of science. Not only that, he pointed me to this NPR article about how legitimate writers (like me) are having their writing being erroneously flagged as written by AI!

So not only are we wasting time and resources of reviewers and journals, we are also possibly rejecting good, solid writing before it even gets reviewed, and accepting complete tripe for review. What could we do about it? Here’s my recommendation…

Modify the COPE Guidance on “Artificial Intelligence in Decision-Making”

COPE stands for “Committee on Publication Ethics”. It is a non-profit organization run out of the United Kingdom that makes recommendations on how to run journals ethically. Many publishers require all their journals to follow COPE guidance, which can be found on their web page. You can access their guidance by becoming a member or else signing up for a free guest account and logging in.

COPE already has a guidance on “Artificial Intelligence in Decision-Making” (last updated in 2021). The guidance is over 10 pages, but you can download my one-page summary here. When it comes to editorial decisions, the guidance says:

At this point in time in the development of AI and the evolution of mindsets, we recommend that if an editorial decision is made by AI that provides a final outcome for an article, such as acceptance or rejection, the decision should directly involve an editor. The decision cannot be made by an AI tool alone.

However, it doesn’t say anything about sending manuscripts for review. I feel like that needs to be added to this guidance – that choosing whether manuscripts are sent for peer-review or not “should directly involve an editor” and “cannot be made by an AI tool alone”.

For those who review manuscripts: What are your observations about the level of quality of manuscripts you are reviewing recently? If you are getting a lot of tripe, what do you think we should do about it? Please put your opinion in the comments.

Read all of our data science blog posts!

Poor Quality Manuscripts – Wasting Reviewer Time and Journal Resources

Poor quality manuscripts are being passed onto reviewers, thus wasting our time. My post discusses [...]

Calculate MET (Metabolic Equivalent of Task) for NHANES Data

Calculate MET minutes per week from exercise data so you can compare physical activity level [...]

Order of Authors on a Scientific Paper: Shoot Straight and Don’t Fight

Order of authors on a scientific paper can be challenging and cause disagreements. My blog [...]

2 Comments

Scaling Rates for Public Health Communication: Why You Should Do it, and How

Scaling rates in public health is important if you want to communicate clearly with your [...]

Choosing a Journal for Your Scientific Manuscript: Tips, Tricks, and Considerations

Choosing a journal for your scientific manuscript needs to be strategic, or your publication will [...]

Problems with PRISMA: Why it Sucks, and What You Should Do About It

Problems with PRISMA? You’re not the only one. The PRISMA framework does not work well [...]

Prevent Research Misconduct, and Avoid the Drama

Prevent research misconduct, and the consequences and drama that goes with it. Use some simple, [...]

Mixed Methods Research: The Hot New Trend in Graduate School

Mixed methods research is trending now, with doctoral students and academics being pressured to do [...]

AI or Statistics – Which Modeling Approach Should You Use?

AI or statistics – two different, interrelated approaches you can use in your scientific publication. [...]

Confidence Intervals are for Estimating a Range for the True Population-level Measure

Confidence intervals (CIs) help you get a solid estimate for the true population measure. Read [...]

1 Comment

Continuous Variable? You Can Categorize it!

Continuous variable categorized can open up a world of possibilities for analysis. Read about it [...]

2 Comments

Delete if the Row Meets Criteria? Do it in SAS!

Delete if rows meet a certain criteria is a common approach to paring down a [...]

Chi-square Test: Insight from Using Microsoft Excel

Chi-square test is hard to grasp – but doing it in Microsoft Excel can give [...]

Identify Elements of Research in Scientific Literature

Identify elements in research reports, and you’ll be able to understand them much more easily. [...]

Design the Most Useful Time Periods for Your Conversions

Time periods are important when creating a time series visualization that actually speaks to you! [...]

Apply Weights? It’s Easy in R with the Survey Package!

Apply weights to get weighted proportions and counts! Read my blog post to learn how [...]

Make Categorical Variable Out of Continuous Variable

Make categorical variables by cutting up continuous ones. But where to put the boundaries? Get [...]

Remove Rows in R with the Subset Command

Remove rows by criteria is a common ETL operation – and my blog post shows [...]

CDC Wonder for Studying Vaccine Adverse Events: The Shameful State of US Open Government Data

CDC Wonder is an online query portal that serves as a gateway to many government [...]

AI Careers: Riding the Bubble

AI careers are not easy to navigate. Read my blog post for foolproof advice for [...]

Descriptive Analysis of Black Friday Death Count Database: Creative Classification

Descriptive analysis of Black Friday Death Count Database provides an example of how creative classification [...]

Classification Crosswalks: Strategies in Data Transformation

Classification crosswalks are easy to make, and can help you reduce cardinality in categorical variables, [...]

FAERS Data: Getting Creative with an Adverse Event Surveillance Dashboard

FAERS data are like any post-market surveillance pharmacy data – notoriously messy. But if you [...]

4 Comments

Dataset Source Documentation: Necessary for Data Science Projects with Multiple Data Sources

Dataset source documentation is good to keep when you are doing an analysis with data [...]

Joins in Base R: Alternative to SQL-like dplyr

Joins in base R must be executed properly or you will lose data. Read my [...]

NHANES Data: Pitfalls, Pranks, Possibilities, and Practical Advice

NHANES data piqued your interest? It’s not all sunshine and roses. Read my blog post [...]

Color in Visualizations: Using it to its Full Communicative Advantage

Color in visualizations of data curation and other data science documentation can be used to [...]

Defaults in PowerPoint: Setting Them Up for Data Visualizations

Defaults in PowerPoint are set up for slides – not data visualizations. Read my blog [...]

Text and Arrows in Dataviz Can Greatly Improve Understanding

Text and arrows in dataviz, if used wisely, can help your audience understand something very [...]

Shapes and Images in Dataviz: Making Choices for Optimal Communication

Shapes and images in dataviz, if chosen wisely, can greatly enhance the communicative value of [...]

Table Editing in R is Easy! Here Are a Few Tricks…

Table editing in R is easier than in SAS, because you can refer to columns, [...]

R for Logistic Regression: Example from Epidemiology and Biostatistics

R for logistic regression in health data analytics is a reasonable choice, if you know [...]

272 Comments

Connecting SAS to Other Applications: Different Strategies

Connecting SAS to other applications is often necessary, and there are many ways to do [...]

Portfolio Project Examples for Independent Data Science Projects

Portfolio project examples are sometimes needed for newbies in data science who are looking to [...]

Project Management Terminology for Public Health Data Scientists

Project management terminology is often used around epidemiologists, biostatisticians, and health data scientists, and it’s [...]

Rapid Application Development Public Health Style

“Rapid application development” (RAD) refers to an approach to designing and developing computer applications. In [...]

Understanding Legacy Data in a Relational World

Understanding legacy data is necessary if you want to analyze datasets that are extracted from [...]

Front-end Decisions Impact Back-end Data (and Your Data Science Experience!)

Front-end decisions are made when applications are designed. They are even made when you design [...]

Reducing Query Cost (and Making Better Use of Your Time)

Reducing query cost is especially important in SAS – but do you know how to [...]

Curated Datasets: Great for Data Science Portfolio Projects!

Curated datasets are useful to know about if you want to do a data science [...]

Statistics Trivia for Data Scientists

Statistics trivia for data scientists will refresh your memory from the courses you’ve taken – [...]

Management Tips for Data Scientists

Management tips for data scientists can be used by anyone – at work and in [...]

REDCap Mess: How it Got There, and How to Clean it Up

REDCap mess happens often in research shops, and it’s an analysis showstopper! Read my blog [...]

GitHub Beginners in Data Science: Here’s an Easy Way to Start!

GitHub beginners – even in data science – often feel intimidated when starting their GitHub [...]

ETL Pipeline Documentation: Here are my Tips and Tricks!

ETL pipeline documentation is great for team communication as well as data stewardship! Read my [...]

Benchmarking Runtime is Different in SAS Compared to Other Programs

Benchmarking runtime is different in SAS compared to other programs, where you have to request [...]

End-to-End AI Pipelines: Can Academics Be Taught How to Do Them?

End-to-end AI pipelines are being created routinely in industry, and one complaint is that academics [...]

Referring to Columns in R by Name Rather than Number has Pros and Cons

Referring to columns in R can be done using both number and field name syntax. [...]

The Paste Command in R is Great for Labels on Plots and Reports

The paste command in R is used to concatenate strings. You can leverage the paste [...]

Coloring Plots in R using Hexadecimal Codes Makes Them Fabulous!

Recoloring plots in R? Want to learn how to use an image to inspire R [...]

5 Comments

Adding Error Bars to ggplot2 Plots Can be Made Easy Through Dataframe Structure

Adding error bars to ggplot2 in R plots is easiest if you include the width [...]

AI on the Edge: What it is, and Data Storage Challenges it Poses

“AI on the edge” was a new term for me that I learned from Marc [...]

Pie Chart ggplot Style is Surprisingly Hard! Here’s How I Did it

Pie chart ggplot style is surprisingly hard to make, mainly because ggplot2 did not give [...]

5 Comments

Time Series Plots in R Using ggplot2 Are Ultimately Customizable

Time series plots in R are totally customizable using the ggplot2 package, and can come [...]

Data Curation Solution to Confusing Options in R Package UpSetR

Data curation solution that I posted recently with my blog post showing how to do [...]

Making Upset Plots with R Package UpSetR Helps Visualize Patterns of Attributes

Making upset plots with R package UpSetR is an easy way to visualize patterns of [...]

11 Comments

Making Box Plots Different Ways is Easy in R!

Making box plots in R affords you many different approaches and features. My blog post [...]

Convert CSV to RDS When Using R for Easier Data Handling

Convert CSV to RDS is what you want to do if you are working with [...]

GPower Case Example Shows How to Calculate and Document Sample Size

GPower case example shows a use-case where we needed to select an outcome measure for [...]

Querying the GHDx Database: Demonstration and Review of Application

Querying the GHDx database is challenging because of its difficult user interface, but mastering it [...]

Variable Names in SAS and R Have Different Restrictions and Rules

Variable names in SAS and R are subject to different “rules and regulations”, and these [...]

Referring to Variables in Processing Data is Different in SAS Compared to R

Referring to variables in processing is different conceptually when thinking about SAS compared to R. [...]

Counting Rows in SAS and R Use Totally Different Strategies

Counting rows in SAS and R is approached differently, because the two programs process data [...]

Native Formats in SAS and R for Data Are Different: Here’s How!

Native formats in SAS and R of data objects have different qualities – and there [...]

SAS-R Integration Example: Transform in R, Analyze in SAS!

Looking for a SAS-R integration example that uses the best of both worlds? I show [...]

Dumbbell Plot for Comparison of Rated Items: Which is Rated More Highly – Harvard or the U of MN?

Want to compare multiple rankings on two competing items – like hotels, restaurants, or colleges? [...]

2 Comments

Data for Meta-analysis Need to be Prepared a Certain Way – Here’s How

Getting data for meta-analysis together can be challenging, so I walk you through the simple [...]

Sort Order, Formats, and Operators: A Tour of The SAS Documentation Page

Get to know three of my favorite SAS documentation pages: the one with sort order, [...]

Confused when Downloading BRFSS Data? Here is a Guide

I use the datasets from the Behavioral Risk Factor Surveillance Survey (BRFSS) to demonstrate in [...]

2 Comments

Doing Surveys? Try my R Likert Plot Data Hack!

I love the Likert package in R, and use it often to visualize data. The [...]

3 Comments

I Used the R Package EpiCurve to Make an Epidemiologic Curve. Here’s How It Turned Out.

With all this talk about “flattening the curve” of the coronavirus, I thought I would [...]

Which Independent Variables Belong in a Regression Equation? We Don’t All Agree, But Here’s What I Do.

Trying to decide what independent variables belong in a regression can be daunting. My blog [...]

Poor quality manuscripts are being passed onto reviewers, thus wasting our time. My post discusses the 12 manuscripts I’ve reviewed so far this year in 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.